Nmap Cheat Sheet

Nmap (network mapper), the god of port scanners used for network discovery and the basis for most security enumeration during the initial stages of penetration testing. The tool was written and maintained by Fyodor AKA Gordon Lyon.

Nmap displays exposed services on a target machine along with other useful information such as the verion and OS detection.

Nmap has made twelve movie appearances, including The Matrix Reloaded, Die Hard 4, Girl With the Dragon Tattoo, and The Bourne Ultimatum.

Nmap Trinity

Nmap in a nutshell

  • Host discovery
  • Port discovery / enumeration
  • Service discovery
  • Operating system version detection
  • Hardware (MAC) address detection
  • Service version detection
  • Vulnerability / exploit detection, using Nmap scripts (NSE)

Nmap Examples

Basic Nmap scanning examples, often used at the first stage of enumeration.

Command Description
nmap -sP 10.0.0.0/24 Ping scans the network, listing machines that respond to ping.
nmap -p 1-65535 -sV -sS -T4 target Full TCP port scan using with service version detection – usually my first scan, I find T4 more accurate than T5 and still “pretty quick”.
nmap -v -sS -A -T4 target Prints verbose output, runs stealth syn scan, T4 timing, OS and version detection + traceroute and scripts against target services.
nmap -v -sS -A -T5 target Prints verbose output, runs stealth syn scan, T5 timing, OS and version detection + traceroute and scripts against target services.
nmap -v -sV -O -sS -T5 target Prints verbose output, runs stealth syn scan, T5 timing, OS and version detection.
nmap -v -p 1-65535 -sV -O -sS -T4 target Prints verbose output, runs stealth syn scan, T4 timing, OS and version detection + full port range scan.
nmap -v -p 1-65535 -sV -O -sS -T5 target Prints verbose output, runs stealth syn scan, T5 timing, OS and version detection + full port range scan.
Agressive scan timings are faster, but could yeild inaccurate results!

T5 uses very aggressive scan timings and could lead to missed ports, T4 is a better compromise if you need fast results.

Nmap scan from file

Command Description
nmap -iL ip-addresses.txt Scans a list of IP addresses, you can add options before / after.

Nmap output formats

Command Description
nmap -sV -p 139,445 -oG grep-output.txt 10.0.1.0/24 Outputs “grepable” output to a file, in this example Netbios servers.

E.g, The output file could be grepped for “Open”.

nmap -sS -sV -T5 10.0.1.99 --webxml -oX -
| xsltproc --output file.html -
Export nmap output to HTML report.

Nmap Netbios Examples

Command Description
nmap -sV -v -p 139,445 10.0.0.1/24 Find all Netbios servers on subnet
nmap -sU --script nbstat.nse -p 137 target Nmap display Netbios name
nmap --script-args=unsafe=1 --script
smb-check-vulns.nse -p 445 target
Nmap check if Netbios servers are vulnerable to MS08-067
–script-args=unsafe=1 has the potential to crash servers / services

Becareful when running this command.

Nmap Nikto Scan

Command Description
nmap -p80 10.0.1.0/24 -oG - | nikto.pl -h - Scans for http servers on port 80 and pipes into Nikto for scanning.
nmap -p80,443 10.0.1.0/24 -oG - | nikto.pl -h - Scans for http/https servers on port 80, 443 and pipes into Nikto for scanning.

Nmap Cheatsheet

Target Specification

Nmap allows hostnames, IP addresses, subnets.

Example blah.highon.coffee, nmap.org/24, 192.168.0.1; 10.0.0-255.1-254

Command Description
-iL inputfilename: Input from list of hosts/networks
-iR num hosts: Choose random targets
--exclude host1[,host2][,host3],… : Exclude hosts/networks
--excludefile exclude_file: Exclude list from file

Host Discovery

Command Description
-sL List Scan – simply list targets to scan
-sn Ping Scan – disable port scan
-Pn Treat all hosts as online — skip host discovery
-PS/PA/PU/PY[portlist] TCP SYN/ACK, UDP or SCTP discovery to given ports
-PE/PP/PM ICMP echo, timestamp, and netmask request discovery probes
-PO[protocol list] IP Protocol Ping
-n/-R Never do DNS resolution/Always resolve [default: sometimes]

Scan Techniques

Command Description
-sS
-sT
-sA
-sW
-sM
TCP SYN scan
Connect scan
ACK scan
Window scan
Maimon scan
-sU UDP Scan
-sN
-sF
-sX
TCP Null scan
FIN scan
Xmas scan
--scanflags Customize TCP scan flags
-sI zombie host[:probeport] Idle scan
-sY
-sZ
SCTP INIT scan
COOKIE-ECHO scan
-sO IP protocol scan
-b "FTP relay host" FTP bounce scan

Port Specification and Scan Order

Command Description
-p Specify ports, e.g. -p80,443 or -p1-65535
-p U:PORT Scan UDP ports with Nmap, e.g. -p U:53
-F Fast mode, scans fewer ports than the default scan
-r Scan ports consecutively – don’t randomize
--top-ports "number" Scan “number” most common ports
--port-ratio "ratio" Scan ports more common than “ratio”

Service Version Detection

Command Description
-sV Probe open ports to determine service/version info
--version-intensity "level" Set from 0 (light) to 9 (try all probes)
--version-light Limit to most likely probes (intensity 2)
--version-all Try every single probe (intensity 9)
--version-trace Show detailed version scan activity (for debugging)

Script Scan

Command Description
-sC equivalent to –script=default
--script="Lua scripts" “Lua scripts” is a comma separated list of directories, script-files or script-categories
--script-args=n1=v1,[n2=v2,...] provide arguments to scripts
-script-args-file=filename provide NSE script args in a file
--script-trace Show all data sent and received
--script-updatedb Update script database
--script-help="Lua scripts" Show help about scripts

OS Detection

Command Description
-O Enable OS Detection
--osscan-limit Limit OS detection to promising targets
--osscan-guess Guess OS more aggressively

Timing and Performance

Options which take TIME are in seconds, or append ‘ms’ (milliseconds), ‘s’ (seconds), ‘m’ (minutes), or ‘h’ (hours) to the value (e.g. 30m).

Command Description
-T 0-5 Set timing template – higher is faster (less accurate)
--min-hostgroup SIZE
--max-hostgroup SIZE
Parallel host scan group sizes
--min-parallelism NUMPROBES
--max-parallelism NUMPROBES
Probe parallelization
--min-rtt-timeout TIME
--max-rtt-timeout TIME
--initial-rtt-timeout TIME
Specifies probe round trip time
--max-retries TRIES Caps number of port scan probe retransmissions
--host-timeout TIME Give up on target after this long
--scan-delay TIME
--max-scan-delay TIME
Adjust delay between probes
--min-rate NUMBER Send packets no slower than NUMBER per second
--max-rate NUMBER Send packets no faster than NUMBER per second

Firewalls IDS Evasion and Spoofing

Command Description
-f; --mtu VALUE Fragment packets (optionally w/given MTU)
-D decoy1,decoy2,ME Cloak a scan with decoys
-S IP-ADDRESS Spoof source address
-e IFACE Use specified interface
-g PORTNUM
--source-port PORTNUM
Use given port number
--proxies url1,[url2],... Relay connections through HTTP / SOCKS4 proxies
--data-length NUM Append random data to sent packets
--ip-options OPTIONS Send packets with specified ip options
--ttl VALUE Set IP time to live field
--spoof-mac ADDR/PREFIX/VENDOR Spoof NMAP MAC address
--badsum Send packets with a bogus TCP/UDP/SCTP checksum

Nmap Output Options

Command Description
-oN Output Normal
-oX Output to XML
-oS Script Kiddie / 1337 speak… sigh
-oG Output greppable – easy to grep nmap output
-oA BASENAME Output in the three major formats at once
-v Increase verbosity level use -vv or more for greater effect
-d Increase debugging level use -dd or more for greater effect
--reason Display the reason a port is in a particular state
--open Only show open or possibly open ports
--packet-trace Show all packets sent / received
--iflist Print host interfaces and routes for debugging
--log-errors Log errors/warnings to the normal-format output file
--append-output Append to rather than clobber specified output files
--resume FILENAME Resume an aborted scan
--stylesheet PATH/URL XSL stylesheet to transform XML output to HTML
--webxml Reference stylesheet from Nmap.Org for more portable XML
--no-stylesheet Prevent associating of XSL stylesheet w/XML output

Misc Nmap Options

Command Description
-6 Enable IPv6 scanning
-A Enable OS detection, version detection, script scanning, and traceroute
--datedir DIRNAME Specify custom Nmap data file location
--send-eth
--send-ip
Send using raw ethernet frames or IP packets
--privileged Assume that the user is fully privileged
--unprivileged Assume the user lacks raw socket privileges
-V Show nmap version number
-h Show nmap help screen

Nmap Enumeration Examples

The following are real world examples of Nmap enumeration.

Enumerating Netbios

The following example enumerates Netbios on the target networks, the same process can be applied to other services by modifying ports / NSE scripts.

Detect all exposed Netbios servers on the subnet.

Nmap find exposed Netbios servers

:

# nmap -sV -v -p 139,445 10.0.1.0/24


Starting Nmap 6.47 ( http://nmap.org ) at 2014-12-11 21:26 GMT
Nmap scan report for nas.decepticons 10.0.1.12
Host is up (0.014s latency).

PORT STATE SERVICE VERSION
139/tcp open netbios-ssn Samba smbd 3.X (workgroup: MEGATRON)
445/tcp open netbios-ssn Samba smbd 3.X (workgroup: MEGATRON)

Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .

Nmap done: 256 IP addresses (1 hosts up) scanned in 28.74 seconds
</p>

Nmap find Netbios name.

Nmap find exposed Netbios servers

:

# nmap -sU –script nbstat.nse -p 137 10.0.1.12


Starting Nmap 6.47 ( http://nmap.org ) at 2014-12-11 21:26 GMT
Nmap scan report for nas.decepticons 10.0.1.12
Host is up (0.014s latency).

PORT STATE SERVICE VERSION
137/udp open netbios-ns

Host script results:
|_nbstat: NetBIOS name: STARSCREAM, NetBIOS user: unknown, NetBIOS MAC: unknown (unknown)
Nmap done: 256 IP addresses (1 hosts up) scanned in 28.74 seconds
</p>

Check if Netbios servers are vulnerable to MS08-067

Nmap check MS08-067

:

# nmap –script-args=unsafe=1 –script smb-check-vulns.nse -p 44510.0.0.1


Nmap scan report for ie6winxp.decepticons (10.0.1.1)
Host is up (0.00026s latency).
PORT STATE SERVICE
445/tcp open microsoft-ds
Host script results:
| smb-check-vulns:
| MS08-067: VULNERABLE
| Conficker: Likely CLEAN
| regsvc DoS: NOT VULNERABLE
| SMBv2 DoS (CVE-2009-3103): NOT VULNERABLE
|_ MS07-029: NO SERVICE (the Dns Server RPC service is inactive)
Nmap done: 1 IP address (1 host up) scanned in 5.45 seconds
</p>

The information gathered during the enumeration indicates the target is vulnerable to MS08-067, exploitation will confirm if it’s vulnerable to MS08-067.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Digital Hacker

Digital Hacker

StormSecurity

IT Security Research and Services

govolution

About assembler and stuff

Astr0baby's not so random thoughts _____ rand() % 100;

ψυχῆς ἰατρεῖον "Hospital of the soul"

Penetration Testing Academy

Education and Advice for Rookies

P.M.C.S.P. Blog

Articles about Physics, Math, Computer Security & Programming and more

%d bloggers like this: